It's validation season in the UK. Make your compliance checks quick, simple and stress-free with the OSPREY PL4 and the OSPREY MCA from Abriox.
#1 The OSPREY PL4 is fast and easy to deploy: once situated, it installs itself. Just swipe with a magnet and within 20 minutes, it will run its own diagnostics, create its own Device Measuring Point (DMP) on PressureTrac™, Abriox's web-based data management system and starts transmitting pipeline pressure data. No laptops, mobile phones, app downloads or further on-site programming is required.
#2 IEM™ or Incident Evaluation Mode - exclusive to Abriox - will be activated for 48 hours to transmit readings on an hourly basis once an OSPREY PL4 is installed. Additionally, an operator can text the unit anytime the unit is in IEM™ mode to get an up-to-date pressure reading.
#3 With in-built GPS, the OSPREY PL4 provides accurate location information and time-stamped pressure data.
#4 The OSPREY PL4 is available in 100mbar, 1bar, 3bar, 10bar and 100bar options.
#5 Need to measure more pressure ranges? The OSPREY MCA adds 2 additional pressure channels to your PL4, with 6 combinations of 100mbar, 1bar, 3bar and 10bar. Used with the MCA, a single OSPREY PL4 unit can be used to measure multiple pressure points in one location.
#6 The OSPREY PL4 and the MCA are both intrinsically safe, and are both ATEX certified.
#7 Data from the OSPREY PL4 is displayed in PressureTrac™, a user-friendly web-based data management system which gives a clear and accurate picture of your gas network. Alarms and profiles can be easily set-up by users to alert operators to potential emergencies and out-of-profile incidents.
#8 User-definable alarm limits and pressure profiles can be easily set up to send alerts of potential emergencies and out-of-profile incidents by text or email.
For more information on the OSPREY PL4 and the OSPREY MCA click here.
For more information on PressureTrac™ click here.
Photo: Abriox UK and Ireland Sales Manager Dominic Boyle with the OSPREY PL4.